This premium brass stock sheet, engineered to exacting standards, offers exceptional durability and corrosion resistance. Its robust composition makes it ideal for demanding safety-critical applications where reliability is paramount.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.649" |
| Length | 40" |
| Width | 47" |
Specified by design engineers worldwide, this 0.649-inch thick brass stock sheet measures 40 inches in length and 47 inches in width. Composed primarily of copper and zinc, it exhibits excellent machinability, good electrical conductivity, and superior resistance to corrosion and tarnishing. The material's inherent strength and non-sparking properties make it a preferred choice for environments where safety is a primary concern, such as electrical enclosures, marine hardware, and protective shielding.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately measure and cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the brass sheet using approved fasteners, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that may cause galvanic corrosion. | Utilize fasteners made from materials like stainless steel or compatible brass alloys to prevent electrochemical reactions. |
| Insufficient edge finishing, leading to potential hazards. | Deburr and smooth all cut edges thoroughly to remove sharp points and prevent injury. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical grounding and bonding components, Marine hardware and fixtures, Protective shielding in hazardous environments, Corrosion-resistant enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||