Engineered as a high-performance lubricating material, this brass stock sheet offers excellent wear resistance and controlled friction properties. Its robust composition makes it suitable for critical components in demanding industrial settings.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.649" |
| Length | 34" |
| Width | 15" |
Designed for demanding industrial environments, this brass stock sheet features a substantial thickness of 0.649 inches, a generous length of 34 inches, and a width of 15 inches. The inherent properties of brass, including its low coefficient of friction and excellent machinability, make it an ideal choice for applications requiring self-lubricating characteristics or reduced wear. This material excels in environments where heat dissipation and corrosion resistance are also critical factors, ensuring longevity and reliable performance under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet to the intended component, ensuring flush contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or uneven edges. | Utilize carbide-tipped blades or abrasive cutting methods specifically designed for brass to ensure clean cuts. |
| Inadequate surface preparation of the mating component. | Thoroughly degrease and clean the mating surface to promote optimal adhesion and friction characteristics. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear pads and guides, Bearing surfaces, Low-friction slides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||