This robust brass stock sheet offers exceptional durability and safety in demanding industrial settings. Its non-sparking properties and inherent corrosion resistance make it ideal for hazardous environments and long-term performance.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.647" |
| Length | 40" |
| Width | 31" |
Manufactured under strict quality controls, this brass stock sheet boasts a substantial thickness of 0.647 inches, a width of 31 inches, and a length of 40 inches. Composed of a high-purity brass alloy, it exhibits excellent tensile strength, superior corrosion resistance, and non-sparking characteristics, crucial for environments where electrical discharge poses a risk. Its machinability allows for precise customization to meet specific project requirements. Verified dimensional tolerances ensure consistent performance in critical safety installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Precisely cut the brass sheet to the required dimensions using appropriate cutting tools and safety equipment. 3. Securely fasten the brass sheet to the substrate using corrosion-resistant fasteners, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which can corrode and compromise the integrity of the installation. | Utilize stainless steel or brass fasteners that are compatible with the brass sheet to prevent galvanic corrosion. |
| Improper handling leading to scratches or dents, which can create stress points. | Handle the sheet with care, using gloves and avoiding abrasive contact with surfaces. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Non-sparking tool surfaces and components in hazardous locations, Electrical grounding and bonding applications requiring high conductivity, Corrosion-resistant plating and shielding in chemical processing environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||