This 0.643" thick Nylon stock sheet, measuring 29" x 32", is engineered for exceptional durability and performance in demanding material handling environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.643" |
| Length | 29" |
| Width | 32" |
Purpose-built for heavy-duty applications, this Nylon stock sheet offers superior abrasion resistance, high tensile strength, and excellent impact toughness. Its robust nature makes it ideal for wear strips, chute liners, and impact pads in conveyor systems, material transfer points, and processing equipment. The material's low coefficient of friction facilitates smooth material flow, reducing wear on adjacent components. Dimensions: 0.643" (Thickness) x 29" (Length) x 32" (Width).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely cut the Nylon sheet to the required dimensions using appropriate cutting tools for plastics. 3. Secure the sheet using fasteners suitable for both the mounting substrate and Nylon, such as cap screws or rivets, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that can damage Nylon under load. | Utilize oversized washers or a backing plate to distribute fastener load and prevent material deformation. |
| Over-tightening fasteners, causing stress cracks in the Nylon. | Hand-tighten fasteners initially, then apply torque incrementally, stopping when snug and ensuring no deformation of the Nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Conveyor Wear Strips, Chute and Hopper Liners, Impact Plates, Guide Rails, Cutting Boards for Material Handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||