This robust carbon steel stock sheet is engineered for demanding abrading and polishing tasks. Its substantial 0.643" thickness and precise dimensions ensure consistent material removal and superior surface finishing in industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.643" |
| Length | 30" |
| Width | 16" |
Engineered for reliability and performance, this carbon steel stock sheet offers a nominal thickness of 0.643 inches (approx. 16.3 mm), a length of 30 inches (approx. 762 mm), and a width of 16 inches (approx. 406 mm). Manufactured from high-grade carbon steel, it possesses excellent hardness and wear resistance, making it ideal for aggressive material removal and the creation of finely finished surfaces. Its consistent gauge and flat profile ensure predictable results in grinding, buffing, and deburring operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is securely mounted to your abrading or polishing machinery. 2. Verify proper alignment to prevent uneven wear. 3. Perform a test run at reduced speed to confirm stability and performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the sheet with improper mounting, leading to vibration and premature wear. | Always utilize robust mounting hardware and follow manufacturer guidelines for secure fixture of the stock sheet. |
| Applying excessive pressure during operation, causing heat buildup and deformation. | Gradually increase pressure as needed, allowing for adequate cooling between cycles to maintain material integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Industrial grinding and surface preparation, Metal deburring and edge finishing, Automotive and aerospace component polishing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||