This high-quality carbon steel stock sheet, specifically formulated for lubricating applications, offers exceptional durability and reduced friction. Its robust material properties ensure reliable performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.642" |
| Length | 48" |
| Width | 23" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a precise thickness of 0.642 inches, a length of 48 inches, and a width of 23 inches. Engineered from a specific carbon steel alloy optimized for low friction and wear resistance, it exhibits excellent machinability for custom component fabrication. The material's inherent strength and thermal conductivity make it suitable for applications requiring heat dissipation and reliable performance under continuous load. Its surface finish is prepared to accept and retain lubricants effectively, minimizing wear on mating parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Apply a suitable industrial lubricant to both the stock sheet and the corresponding component. 3. Securely fasten the stock sheet according to design specifications, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate lubrication, leading to premature wear. | Always use industrial-grade lubricants recommended for the specific application and operating conditions. |
| Improper surface preparation before assembly. | Thoroughly clean all surfaces to remove contaminants that could impede lubrication or cause abrasion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Bearing surfaces in heavy machinery, Sliding components in automated systems, Wear plates for conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||