This 0.639" thick Nylon stock sheet offers exceptional durability and wear resistance. Its robust properties make it an ideal raw material for a wide range of demanding industrial applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.639" |
| Length | 40" |
| Width | 44" |
A proven choice for industrial professionals, this Nylon stock sheet, measuring 0.639" in thickness, 40" in length, and 44" in width, provides superior mechanical strength and excellent abrasion resistance. Its high tensile strength and low coefficient of friction ensure reliable performance in harsh environments. Ideal for fabrication of wear pads, bushings, gears, and structural components requiring toughness and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cutting lines on the Nylon sheet. 2. Use appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) for a clean, precise cut. 3. Securely fasten the fabricated Nylon component using appropriate fasteners, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard saw blades which can lead to melting or chipping. | Utilize a saw blade specifically designed for plastics, such as a carbide-tipped blade with a negative hook angle, to ensure clean cuts and prevent material damage. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Employ washers to distribute the load and tighten fasteners to a recommended torque specification, avoiding excessive force. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Gears and Sprockets, Chute Liners, Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||