This high-performance brass stock sheet, specifically engineered for lubricating applications, offers superior machinability and inherent self-lubricating properties for demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.639" |
| Length | 18" |
| Width | 25" |
A high-performance industrial component, this brass stock sheet is manufactured to precise tolerances, featuring a thickness of 0.639 inches, a length of 18 inches, and a width of 25 inches. The inherent properties of brass, including its excellent machinability, moderate strength, and notable resistance to corrosion, make it an ideal material for applications where reduced friction and wear are critical. This stock is specifically formulated to enhance its lubricating capabilities, ensuring smooth operation and extended service life in components subject to constant movement and potential galling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface to which the brass sheet will be applied is clean, dry, and free from contaminants. 2. Carefully measure and cut the brass sheet to the required dimensions for your specific component. 3. Securely fasten the cut brass sheet using appropriate industrial adhesives or mechanical fasteners, ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools which can cause burring and affect dimensional accuracy. | Employ sharp, high-speed cutting tools specifically designed for machining brass to achieve clean cuts and maintain precise dimensions. |
| Insufficient surface preparation before installation, leading to poor adhesion or premature wear. | Thoroughly degrease and abrade the mating surfaces to ensure optimal bonding and longevity of the lubricating component. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear strips and guides in machinery, Bearing surfaces for sliding components, Low-friction bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||