This industrial-grade brass stock sheet offers superior machinability, corrosion resistance, and excellent electrical conductivity. Its robust dimensions make it suitable for diverse fabrication and manufacturing projects requiring durable, high-performance raw material.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.637" |
| Length | 45" |
| Width | 40" |
Manufactured under strict quality controls, this brass stock sheet boasts a nominal thickness of 0.637 inches, with a generous length of 45 inches and a width of 40 inches. Composed primarily of copper and zinc, its alloy composition provides a balanced blend of strength, ductility, and resistance to environmental degradation. This material is ideal for applications demanding reliable thermal and electrical conductivity, as well as good formability for complex designs. It adheres to industry standards for mechanical properties and dimensional tolerances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and well-lit. 2. Carefully position the brass sheet using appropriate lifting equipment if necessary. 3. Secure the sheet for cutting, shaping, or assembly using clamps or other suitable methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for brass, leading to burring or material damage. | Employ sharp, high-speed steel or carbide cutting tools specifically designed for non-ferrous metals. Ensure proper lubrication during cutting. |
| Inadequate surface preparation before welding or brazing, resulting in poor joint integrity. | Thoroughly clean the joint area with a wire brush and degreaser to remove any oxides, grease, or contaminants. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical component fabrication, Marine hardware manufacturing, Decorative architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||