This robust 0.636" thick polycarbonate stock sheet is engineered for demanding suspending and bracing applications. Offering exceptional impact strength and clarity, it ensures reliable performance in industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.636" |
| Length | 39" |
| Width | 12" |
A proven choice for industrial professionals, this 0.636" thick polycarbonate stock sheet (39" x 12") delivers superior performance in suspending and bracing applications. Fabricated from high-impact polycarbonate, it boasts excellent clarity, UV resistance, and a broad operating temperature range, making it ideal for both indoor and outdoor use. Its inherent strength-to-weight ratio ensures structural integrity without excessive load. This material is readily machinable and formable, allowing for custom fabrication to meet precise project specifications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare mounting surfaces ensuring they are clean and structurally sound. 2. Cut polycarbonate sheet to required dimensions using appropriate tools. 3. Securely fasten the sheet using corrosion-resistant hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing stress points and potential cracking. | Use washers and allow for slight expansion/contraction by not fully tightening hardware. |
| Using incompatible adhesives or sealants that can degrade polycarbonate. | Consult material compatibility charts and use only polycarbonate-approved sealants. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding and enclosures, Industrial shelving and supports, Custom bracing and structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||