This heavy-duty carbon steel stock sheet provides exceptional strength and rigidity for a wide range of industrial fabrication and repair tasks. Precisely manufactured for consistent performance.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.634" |
| Length | 20" |
| Width | 15" |
A high-performance industrial component, this carbon steel stock sheet boasts a substantial 0.634" (16.1 mm) thickness, ensuring superior load-bearing capacity and impact resistance. Measuring 20" (508 mm) in length and 15" (381 mm) in width, it offers ample material for robust structural work. Composed of high-carbon steel, it exhibits excellent hardness, wear resistance, and the ability to hold a sharp edge, making it ideal for cutting, shaping, and forming applications in demanding manufacturing and maintenance environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface of the stock sheet thoroughly to remove any oil, grease, or debris. 2. Precisely measure and mark the desired cut lines using a calibrated measuring tool and scribe. 3. Utilize appropriate cutting tools (e.g., band saw, plasma cutter, abrasive chop saw) to make precise cuts, ensuring adherence to safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient cutting tools for the material thickness, leading to poor cut quality and potential tool damage. | Select cutting tools rated for and capable of handling the 0.634" thickness of carbon steel. Consult tool manufacturer specifications. |
| Failing to deburr cut edges, which can create safety hazards and interfere with subsequent assembly or welding. | Immediately after cutting, use a file, grinder, or deburring tool to smooth all cut edges, removing any sharp burrs. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom fabrication of heavy-duty brackets and supports, Reinforcement plates for structural components, Material stock for custom tooling and dies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||