Engineered for superior performance in lubricating applications, this brass stock sheet offers exceptional wear resistance and low friction. Its robust construction ensures longevity in high-demand industrial settings.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.631" |
| Length | 36" |
| Width | 20" |
Designed for demanding industrial environments, this 0.631" thick brass stock sheet, measuring 36" in length and 20" in width, provides an optimized material solution for lubrication. The inherent properties of brass, including its excellent machinability and low coefficient of friction, make it ideal for manufacturing components that require self-lubricating characteristics and resistance to galling. This sheet is manufactured to precise tolerances, ensuring consistent performance in bushings, bearings, wear pads, and other sliding mechanisms where reduced friction and extended service life are paramount. Its inherent corrosion resistance further enhances its suitability for diverse operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Accurately machine the brass stock sheet to the required component dimensions. 3. Install the fabricated component, ensuring proper alignment and fit within the assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate lubrication during machining, leading to tool wear and poor surface finish. | Employ appropriate cutting fluids and coolants during all machining operations to maintain tool sharpness and achieve a smooth finish. |
| Improperly aligning fabricated components, causing premature wear and operational failure. | Perform thorough alignment checks during installation and verify that the component moves freely without binding. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings, Wear pads and strips, Journal bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||