This heavy-duty carbon steel stock sheet, specifically designated for lubricating applications, offers exceptional durability and controlled surface properties. Ideal for environments requiring reduced friction and enhanced component longevity.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.626" |
| Length | 22" |
| Width | 36" |
Precision-manufactured to tight tolerances, this 0.626-inch thick carbon steel stock sheet measures 22 inches by 36 inches. Its formulation is optimized for lubricating applications, exhibiting a controlled microstructure that facilitates optimal oil retention and minimizes wear under high-load conditions. The material's inherent strength and machinability ensure reliable performance in demanding environments, such as bearings, sliding mechanisms, and specialized wear plates where consistent lubrication and reduced friction are paramount for operational efficiency and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Position the sheet accurately according to design specifications. 3. Securely fasten the sheet using appropriate industrial hardware, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation before installation. | Thoroughly degrease and clean the sheet surface to ensure optimal adhesion and performance of any applied lubricants or coatings. |
| Over-tightening fasteners, leading to sheet deformation. | Utilize torque-controlled fastening methods and consider intermediate support structures if necessary to maintain flatness and structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Industrial bearing surfaces, Sliding wear plates, Conveyor system components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||