This robust 0.625-inch thick carbon steel stock sheet is precisely cut to 16x29 inches, offering exceptional load-bearing capacity and structural integrity for demanding material handling environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.625" |
| Length | 16" |
| Width | 29" |
Precision-manufactured to tight tolerances, this 0.625-inch thick carbon steel stock sheet measures 16 inches in length and 29 inches in width. Composed of high-strength, low-alloy carbon steel, it exhibits excellent tensile strength and yield strength, making it ideal for fabricating custom material handling equipment, structural components, and heavy-duty platforms. The material's inherent durability ensures resistance to deformation under significant stress, providing a reliable foundation for a wide range of industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity prior to installation. 2. Secure the sheet using appropriate welding, bolting, or fastening methods based on the application. 3. Ensure proper alignment and load distribution for optimal performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners or inadequate welding techniques. | Always consult engineering drawings and specifications for recommended fastener sizes and welding procedures to match the sheet's load-bearing requirements. |
| Neglecting surface preparation before welding or coating. | Thoroughly clean the surface of any mill scale, rust, or contaminants to ensure proper adhesion and weld quality. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom fabrication of industrial shelving and racks, Base plates and structural supports for heavy machinery, Reinforcement for platforms and work surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||