This robust brass stock sheet, precisely manufactured to 0.623" thickness, is engineered for demanding abrading and polishing applications. Its superior malleability and corrosion resistance ensure consistent results and extended service life in industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.623" |
| Length | 29" |
| Width | 25" |
Engineered for reliability and performance, this brass stock sheet features a precise thickness of 0.623 inches, a substantial length of 29 inches, and a width of 25 inches. Fabricated from high-grade brass, it offers excellent thermal conductivity, good ductility, and superior resistance to corrosion, making it an ideal substrate for abrasive media and polishing compounds. Its uniform grain structure ensures predictable wear patterns and optimal surface finishing across a variety of industrial processes, from deburring to fine polishing of metal components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the designated surface thoroughly to remove any debris or contaminants. 2. Position the brass stock sheet accurately according to the project requirements. 3. Secure the sheet using appropriate fasteners or adhesives suitable for the application and material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a thickness unsuitable for the intended abrasive or polishing grit. | Consult abrasive media specifications to ensure the 0.623" thickness provides adequate support without excessive material waste. |
| Inadequate surface preparation before application. | Ensure the substrate onto which the brass sheet is applied is free of grease, oil, or other contaminants to guarantee proper adhesion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision abrasive backing, Custom polishing substrate fabrication, Industrial finishing and surface preparation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||