This industrial-grade brass stock sheet offers exceptional durability and corrosion resistance. Its precise dimensions make it a reliable choice for custom fabrication and demanding material handling solutions.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.617" |
| Length | 45" |
| Width | 44" |
Trusted by engineers across multiple sectors, this brass stock sheet is manufactured to exacting standards, ensuring consistent performance in critical applications. With a thickness of 0.617 inches, a length of 45 inches, and a width of 44 inches, it provides ample material for complex designs. Brass's inherent properties, including excellent machinability, solderability, and resistance to tarnishing and corrosion, make it the material of choice for environments where durability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate by ensuring it is clean, dry, and free of contaminants. 2. Precisely cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Secure the brass sheet using approved fastening methods, such as welding, riveting, or bolting, depending on the application's structural requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation before bonding or welding. | Thoroughly clean and degrease the brass surface to ensure optimal adhesion or weld integrity. |
| Using incorrect cutting tools, leading to material damage or poor edge quality. | Employ sharp, high-quality cutting tools specifically designed for brass to achieve clean cuts and prevent burring. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabrication of chutes and hoppers, Wear plates and guides for conveyor systems, Protective cladding for sensitive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||