This robust 304 stainless steel stock sheet offers superior durability and corrosion resistance. Precisely sized for critical measuring, inspection, and fabrication tasks in demanding industrial environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.616" |
| Length | 46" |
| Width | 30" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.616 inches in thickness, 46 inches in length, and 30 inches in width. Composed of a chromium-nickel alloy, it exhibits excellent resistance to oxidation and corrosion, making it ideal for use in harsh environments. Its high tensile strength and formability allow for precise machining and integration into complex systems. This material is non-magnetic in its annealed state and is commonly specified for applications requiring hygienic surfaces, chemical resistance, and long-term dimensional stability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the target surface thoroughly, ensuring it is free from debris and contaminants. 2. Carefully position the stock sheet according to the project design specifications. 3. Secure the sheet using appropriate fastening methods, such as welding, riveting, or mechanical fasteners, as dictated by the application's structural requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible cleaning agents that can cause surface etching or discoloration. | Always consult the material data sheet for recommended cleaning agents. Mild detergents and water are typically safe, followed by thorough rinsing and drying. |
| Exceeding the recommended bending or forming radii, leading to material stress fractures or compromising dimensional integrity. | Adhere to established minimum bend radii guidelines for 0.616" thick 304 stainless steel to prevent material failure and maintain structural integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Precision measurement fixtures, Inspection surface plates, Industrial fabrication substrates, Corrosion-resistant component bases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||