This high-quality brass stock sheet is specifically engineered for demanding lubricating applications. Its inherent properties ensure exceptional wear resistance and a low coefficient of friction, making it a superior choice for critical components.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.615" |
| Length | 20" |
| Width | 25" |
Purpose-built for heavy-duty applications, this 0.615-inch thick brass stock sheet offers superior performance in environments requiring consistent lubrication and high wear resistance. Measuring 20 inches by 25 inches, its dense grain structure and self-lubricating characteristics minimize friction and extend component life. This material is ideal for manufacturing bearings, bushings, wear plates, and sliding mechanisms where galling and abrasion are significant concerns. Its excellent machinability allows for precise fabrication of complex geometries, ensuring optimal fit and function in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely machine the brass stock sheet to the required dimensions and tolerances. 3. Install the fabricated component, ensuring proper alignment and fit within the assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys where self-lubricating properties are critical. | Select this specific lubricating grade brass stock sheet for applications demanding reduced friction and wear. |
| Inadequate surface preparation of mating components, leading to premature wear. | Thoroughly clean and de-grease all mating surfaces before installation to optimize performance and longevity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing manufacturing, Bushings and sleeves, Wear plates and guides, Sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||