This lubricating grade brass stock sheet, precision-manufactured to exacting standards, offers exceptional self-lubricating properties and low friction characteristics for demanding industrial applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.614" |
| Length | 24" |
| Width | 20" |
Specified by design engineers worldwide, this brass stock sheet boasts a nominal thickness of 0.614 inches, a length of 24 inches, and a width of 20 inches. Composed of a specific brass alloy optimized for reduced friction and excellent wear resistance, it exhibits superior machinability and corrosion resistance. Its dense grain structure and inherent lubricity make it an ideal material for bushings, bearings, wear plates, and other components subjected to sliding contact and requiring minimal external lubrication, ensuring extended service life and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, smooth, and free of contaminants. 2. Cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component to the mating surface, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grade of brass for high-friction applications. | Always specify and utilize lubricating grade brass for components experiencing significant sliding wear and requiring reduced friction. |
| Inadequate surface preparation of the mating component. | Thoroughly clean and deburr the mating surface to prevent premature wear and ensure optimal contact with the brass sheet. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bushings and Bearings, Wear Plates and Strips, Slide Guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||