This robust brass stock sheet is engineered for demanding lubrication roles. Its precise dimensions and superior material properties ensure reliable performance in high-friction environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.612" |
| Length | 41" |
| Width | 27" |
Purpose-built for heavy-duty applications, this brass stock sheet boasts a substantial 0.612" thickness, measuring 41" in length and 27" in width. Composed of a specialized brass alloy, it exhibits exceptional inherent lubricity, low coefficient of friction, and excellent wear resistance. These properties make it ideal for applications requiring reduced mechanical stress and extended component lifespan under significant load and continuous operation. Its machinability also allows for custom fabrication of wear pads, bushings, and sliding components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free of debris. 2. Accurately cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component to the intended mating surface, verifying proper alignment and clearance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy not optimized for lubrication. | Select brass alloys specifically formulated for low friction and wear resistance in lubricating applications. |
| Insufficient lubrication during machining, leading to tool wear and poor surface finish. | Utilize ample cutting fluid and appropriate machining parameters when shaping the brass stock. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty bearing surfaces, Wear strips for sliding mechanisms, Custom bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||