This 0.611" thick carbon steel stock sheet, measuring 40" x 26", is a foundational component for robust pneumatic system fabrication. Its high strength and dimensional stability ensure reliable performance under pressure.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.611" |
| Length | 40" |
| Width | 26" |
Engineered for reliability and performance, this 0.611" thick carbon steel stock sheet provides exceptional structural integrity for demanding pneumatic applications. Manufactured from high-grade carbon steel, it exhibits superior tensile strength and impact resistance, crucial for components subjected to high pressures and mechanical stress. The precise dimensions of 40" in length and 26" in width allow for efficient material utilization and fabrication of custom pneumatic system enclosures, mounting brackets, and housings. Its inherent durability ensures long-term service life even in harsh industrial environments. This material is readily machinable, weldable, and formable, offering extensive design flexibility for engineers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the surface of the carbon steel sheet by degreasing and removing any surface contaminants. 2. Accurately mark and cut the sheet to the required dimensions for your pneumatic system component. 3. Perform any necessary machining, bending, or welding operations according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade steel that cannot withstand pneumatic pressures. | Always verify the material specifications of the carbon steel to ensure it meets the required tensile strength and pressure ratings for the intended pneumatic application. |
| Inadequate surface preparation before fabrication, leading to poor weld adhesion or premature corrosion. | Thoroughly degrease and clean the carbon steel surface to ensure optimal adhesion for welding, coating, or other finishing processes. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder housings, Air receiver tank fabrication, Mounting brackets for pneumatic actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||