This premium brass stock sheet offers exceptional machinability and corrosion resistance. Its robust dimensions make it suitable for a wide range of custom fabrication and industrial component needs.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.606" |
| Length | 19" |
| Width | 34" |
Engineered for reliability and performance, this brass stock sheet is manufactured from high-grade brass alloy, offering excellent ductility, electrical conductivity, and superior corrosion resistance against various environmental factors. With precise dimensions of 0.606 inches (15.39 mm) thickness, 19 inches (482.6 mm) length, and 34 inches (863.6 mm) width, it is optimized for demanding applications requiring consistent material properties and dimensional accuracy. Its non-sparking nature further enhances safety in hazardous environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of contaminants. 2. Accurately measure and cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated component using suitable fastening methods, considering the material's properties.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication. | Utilize carbide-tipped or specialized brass cutting tools with adequate coolant or cutting fluid to prevent galling and ensure a clean cut. |
| Over-tightening fasteners, leading to deformation of the brass sheet. | Apply fasteners with appropriate torque settings, using washers to distribute pressure evenly and avoid damaging the brass surface. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision Machining and Fabrication, Electrical Connectors and Contacts, Decorative Architectural Elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||