This 0.6" Schedule 40 carbon steel seamless pipe offers superior strength and reliability for demanding industrial fluid transfer and structural support. Its precise dimensions ensure optimal performance.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 0.6" |
| Outside Diameter | 1.966" |
| Wall Thickness | 0.141" |
Built to exacting engineering tolerances, this 0.6" nominal pipe size (NPS) seamless carbon steel pipe conforms to ASTM A106 Grade B specifications. It features an outside diameter (OD) of 1.966 inches and a nominal wall thickness of 0.141 inches, yielding a schedule of 40. This construction provides a minimum yield strength of 35,000 psi and a tensile strength of 60,000 psi, making it ideal for high-pressure applications, including steam, water, oil, and gas transportation, as well as general mechanical and structural uses where consistent wall thickness and leak-free performance are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, free of burrs, and properly beveled for welding or threading. 2. Align pipe sections accurately to prevent stress concentrations. 3. Securely join pipe using appropriate welding procedures or threaded fittings, ensuring full penetration and leak-tight seals.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrectly beveling pipe ends for welding. | Always consult welding procedure specifications (WPS) for correct bevel angles and root face to ensure full penetration and joint integrity. |
| Over-tightening threaded connections. | Use proper torque specifications or a calibrated wrench to avoid stripping threads or causing premature failure of fittings. |
A: This Seamless Pipe, Schedule 40 is manufactured from Carbon Steel.
A: High-pressure fluid and gas transmission, Boiler and heat exchanger tubing, Structural components in industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||