This 0.598-inch thick polycarbonate stock sheet offers superior impact resistance and clarity for demanding safety applications. Engineered for durability, it provides robust protection in industrial and commercial environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.598" |
| Length | 13" |
| Width | 37" |
Built to exacting engineering tolerances, this 0.598" thick polycarbonate stock sheet measures 13" in length and 37" in width. Composed of high-performance polycarbonate, it exhibits exceptional impact strength (up to 250 times that of glass) and excellent optical clarity, making it ideal for applications requiring both visibility and protection. Its inherent flame-retardant properties and wide operating temperature range further enhance its suitability for critical safety barriers and machine guarding.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully align the polycarbonate sheet with the intended mounting points. 3. Secure the sheet using appropriate fasteners, ensuring not to over-tighten to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that could cause stress concentrations. | Employ fasteners with large washers or specify pre-drilled holes with adequate clearance to distribute load. |
| Cutting or drilling without proper tools, leading to edge chipping or cracking. | Utilize high-speed steel cutting tools designed for plastics and ensure a consistent, controlled feed rate. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Barriers, Glazing for Hazardous Areas, Safety Shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||