This robust carbon steel stock sheet, measuring 0.598" thick by 41" wide and 40" long, is engineered for demanding pneumatic systems. Its superior strength and formability ensure reliable performance and longevity in critical industrial applications.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.598" |
| Length | 41" |
| Width | 40" |
Precision-manufactured to tight tolerances, this 0.598" thick carbon steel stock sheet offers exceptional structural integrity and consistent performance. The material's inherent tensile strength and resilience make it ideal for fabricating robust pneumatic components, including housings, mounting brackets, and structural elements within high-pressure environments. Its 41" length and 40" width provide ample material for complex geometries and large-scale fabrications, ensuring minimal waste and efficient material utilization in production. The carbon steel composition facilitates excellent weldability and machinability, allowing for seamless integration and customization within existing pneumatic infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants that could affect subsequent fabrication or performance. 2. Accurately mark and cut the carbon steel sheet according to design specifications using appropriate cutting tools. 3. Fabricate and assemble the component, ensuring all connections and interfaces meet pneumatic system pressure and sealing requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for high-pressure pneumatic applications without considering specific grade properties. | Specify and utilize carbon steel grades suitable for pressure vessel fabrication or high-stress environments, ensuring compliance with relevant industry standards. |
| Inadequate surface preparation before welding or forming, leading to material defects or reduced structural integrity. | Thoroughly clean and degrease the carbon steel surface, and perform appropriate preheating if required by the specific carbon steel grade and welding procedure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic actuator housings, Compressed air reservoir fabrication, Structural support for pneumatic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||