This industrial-grade Nylon stock sheet, measuring 0.590" thick, 22" long, and 21" wide, offers exceptional mechanical strength, wear resistance, and low coefficient of friction for demanding applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.590" |
| Length | 22" |
| Width | 21" |
Trusted by engineers across multiple sectors, this Nylon stock sheet exhibits superior tensile strength and excellent machinability, making it ideal for custom fabrication. Its inherent lubricity and high resistance to abrasion ensure extended component life in dynamic systems. The material's ability to absorb shock and vibration, coupled with its good chemical resistance to oils and greases, positions it as a reliable choice for bushings, gears, wear strips, and other engineered components requiring durability and performance under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and mark cutting lines on the Nylon stock sheet. 2. Utilize appropriate sawing equipment with a sharp, fine-tooth blade, ensuring proper coolant application to prevent overheating. 3. Deburr all cut edges to remove any sharp fragments and ensure a smooth finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or inappropriate saw blade, leading to melting or chipping of the Nylon. | Employ a high-quality, fine-tooth carbide-tipped blade specifically designed for plastics. Maintain blade sharpness. |
| Excessive heat build-up during cutting, causing material deformation or degradation. | Apply a suitable cutting fluid or coolant liberally. Reduce feed rate if heat becomes a significant factor. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Bushings and Bearings, Wear Strips and Guides, Gears and Sprockets, Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||