This premium carbon steel stock sheet is engineered for demanding pneumatic applications. Its substantial thickness and precise dimensions ensure structural integrity and long-term reliability in high-pressure environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.588" |
| Length | 29" |
| Width | 47" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a thickness of 0.588 inches, a length of 29 inches, and a width of 47 inches. The material exhibits excellent tensile strength and durability, making it suitable for components requiring high load-bearing capacity and resistance to wear and tear. Its formability allows for precise machining and fabrication into custom pneumatic manifold blocks, structural supports, and housing for various pneumatic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately measure and mark cutting lines according to design specifications. 3. Utilize appropriate cutting tools (e.g., plasma cutter, industrial saw) for precise fabrication. 4. Deburr all edges thoroughly after cutting and any subsequent machining.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inaccurate cutting leading to improper fit | Always double-check measurements and use precision cutting equipment. Employ jigs and fixtures for repetitive cuts. |
| Failure to deburr edges, causing potential safety hazards or assembly issues | Thoroughly deburr all cut edges with appropriate tools to ensure smooth surfaces and prevent snags or interference. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic manifold block fabrication, Structural components for pneumatic systems, Custom housing and enclosures for pneumatic equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||