This premium carbon steel stock sheet, engineered for lubricating applications, offers exceptional durability and a smooth surface finish. Ideal for components requiring reduced friction and wear.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.588" |
| Length | 40" |
| Width | 42" |
Designed for demanding industrial environments, this 0.588-inch thick carbon steel stock sheet measures 40 inches in length and 42 inches in width. Its precise dimensions and robust carbon steel composition ensure superior structural integrity and resistance to deformation under load. The material's inherent lubricating properties make it ideal for sliding mechanisms, wear plates, and components within machinery where reduced friction is paramount. This stock sheet is manufactured to exacting tolerances, guaranteeing consistent performance and interchangeability in high-cycle applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area is clean and free of contaminants. 2. Precisely cut the stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut piece using industry-standard methods (e.g., welding, bolting, riveting) based on application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation before installation. | Thoroughly clean the receiving surface to remove any dirt, grease, or debris that could impede proper adhesion or function. |
| Using incorrect cutting tools, leading to burrs or deformation. | Utilize high-quality cutting tools designed for carbon steel to achieve clean, precise edges without compromising material integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Wear plates in heavy machinery, Sliding surfaces for conveyors, Lubricated bearings and bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||