This high-grade brass stock sheet offers exceptional machinability and durability. Measuring 0.580" thick, 36" wide, and 47" long, it's ideal for demanding industrial applications where precision and material integrity are paramount.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.580" |
| Length | 36" |
| Width | 47" |
Precision-manufactured to tight tolerances, this brass stock sheet (0.580" thickness, 36" width, 47" length) provides superior dimensional stability. Composed of a copper-zinc alloy, it exhibits excellent corrosion resistance, good electrical conductivity, and moderate strength. Its formability and ease of machining make it a preferred material for intricate components, tooling jigs, fixtures, and applications requiring non-sparking properties. Verified material composition ensures consistent performance and reliability in critical industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the intended installation surface to remove any debris or contaminants. 2. Position the brass stock sheet precisely according to design specifications. 3. Secure the sheet using appropriate fasteners or adhesive methods, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper lubrication on brass. | Employ cutting fluids and appropriate feeds/speeds to prevent tool wear and ensure clean cuts. |
| Over-tightening fasteners, leading to deformation of the brass sheet. | Utilize torque-limiting tools or hand-tighten fasteners with care to avoid deforming the material. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision tooling and die manufacturing, Electrical components and connectors, Corrosion-resistant structural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||