This premium brass stock sheet is engineered for superior lubrication performance. Its dense grain structure and inherent self-lubricating properties make it ideal for components requiring reduced friction and wear in demanding industrial applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.576" |
| Length | 30" |
| Width | 14" |
Built to exacting engineering tolerances, this 0.576-inch thick brass stock sheet measures 30 inches in length and 14 inches in width. Composed of a precisely formulated brass alloy, it exhibits excellent machinability and a low coefficient of friction, crucial for minimizing wear in bearing surfaces, bushings, and slide components. The material's inherent corrosion resistance further enhances its longevity in diverse operating conditions, ensuring reliable performance and extended service life in high-demand industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Precisely machine the brass stock sheet to the required dimensions and tolerances for its intended application. 3. Install the machined brass component, ensuring proper alignment and contact with the mating surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys not optimized for lubrication. | Specify a brass alloy with known self-lubricating properties and a low coefficient of friction for critical wear applications. |
| Inadequate surface preparation of mating components. | Ensure both the brass component and its mating surface are meticulously cleaned and free of imperfections to achieve optimal lubrication and prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bushings and Bearings, Slide Plates, Wear Strips, Low-Friction Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||