This premium brass stock sheet is engineered for superior performance in abrading and polishing tasks. Its precise dimensions and high-quality brass composition ensure consistent results and extended service life in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.574" |
| Length | 42" |
| Width | 34" |
Built to exacting engineering tolerances, this brass stock sheet offers a nominal thickness of 0.574 inches, a substantial length of 42 inches, and a width of 34 inches. Manufactured from high-grade brass, it exhibits excellent machinability, corrosion resistance, and a desirable ductility, making it ideal for fabrication into custom abrasive media or polishing components. The material's uniform grain structure facilitates predictable wear patterns crucial for consistent surface finishing operations. Its significant thickness allows for robust applications requiring substantial material removal or long-lasting abrasive surfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Accurately measure and mark the desired cut-out dimensions on the brass sheet. 3. Utilize appropriate cutting tools (e.g., abrasive cut-off wheel, plasma cutter) to create precise shapes. 4. Deburr all cut edges to remove any sharp protrusions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to rough edges and potential material deformation. | Employ sharp, properly maintained cutting tools for clean, precise cuts. Regularly inspect and replace worn blades or tips. |
| Improper handling of large sheets, resulting in bending or damage. | Use appropriate lifting equipment and support the sheet adequately during transport and positioning to prevent warping or kinking. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom abrasive wheel manufacturing, Polishing pad substrate, Precision surface finishing tools.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||