This premium brass stock sheet, measuring 0.572 inches thick and 23 x 45 inches, is specifically engineered for lubricating applications. Its inherent properties ensure superior performance in high-wear environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.572" |
| Length | 23" |
| Width | 45" |
Trusted by engineers across multiple sectors, this brass stock sheet boasts a substantial 0.572" thickness, offering exceptional durability and load-bearing capacity. Composed of brass, it exhibits inherent self-lubricating properties and excellent wear resistance, minimizing friction and extending component life. The generous dimensions of 23" x 45" provide ample material for custom fabrication of critical components in machinery, providing a reliable and cost-effective solution for demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut the brass sheet to the required dimensions for the specific application. 3. Securely fasten the fabricated brass component in its designated position, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys where specific lubricating properties are required. | Select brass alloys specifically formulated for low friction and wear resistance for lubricating applications. |
| Inadequate surface preparation of mating components. | Thoroughly clean and degrease both the brass sheet component and its mating surface before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Wear pads, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||