This premium brass stock sheet offers exceptional durability and corrosion resistance. Precisely manufactured to 0.570" thickness, 42" length, and 46" width, it's an ideal raw material for demanding industrial fabrication and component manufacturing.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.570" |
| Length | 42" |
| Width | 46" |
Trusted by engineers across multiple sectors, this brass stock sheet (0.570" thickness, 42" length, 46" width) is manufactured to exacting standards. Its robust alloy composition ensures excellent machinability, solderability, and a superior strength-to-weight ratio, making it suitable for a wide array of applications including electrical components, marine hardware, and decorative architectural elements. The inherent ductility allows for complex forming operations while maintaining structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or damage prior to cutting. 2. Utilize appropriate cutting tools (e.g., shear, laser cutter) suitable for brass. 3. Ensure proper safety protocols are followed during all fabrication processes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper setup. | Employ carbide-tipped or high-speed steel tooling designed for non-ferrous metals to prevent excessive wear and ensure clean cuts. |
| Inadequate annealing for severe forming operations. | Perform intermediate annealing steps if the sheet is subjected to significant cold working or deep drawing to prevent cracking. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Electrical Connectors and Components, Marine Hardware and Fixtures, Architectural Trim and Decorative Elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||