This robust 0.568-inch thick Nylon stock sheet, measuring 29" by 48", offers exceptional wear resistance and impact strength. Ideal for custom fabrication and high-stress components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.568" |
| Length | 29" |
| Width | 48" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a precise 0.568" thickness, a 29" length, and a 48" width. Exhibiting excellent tensile strength, low friction, and superior abrasion resistance, this industrial-grade Nylon is engineered for demanding environments. Its robust composition makes it suitable for applications requiring high load-bearing capacity, such as wear pads, gears, bushings, and custom machine components where durability and dimensional stability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the nylon sheet using a suitable marker. 2. Secure the nylon sheet firmly to a stable cutting surface with clamps, ensuring no movement during the cutting process. 3. Utilize a high-speed steel or carbide-tipped saw blade designed for plastics, maintaining a consistent feed rate and appropriate cooling to prevent melting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to melting or chipping. | Employ sharp, high-speed steel or carbide-tipped blades specifically designed for cutting plastics. Ensure proper blade tooth pitch and rake angle. |
| Inadequate clamping of the material, causing vibration and imprecise cuts. | Securely clamp the nylon sheet at multiple points to prevent movement and vibration during the sawing operation. Use non-marring clamps if surface finish is critical. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Custom gears and sprockets, Bushings and bearings, Impact plates, Prototyping and tooling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||