This 0.565-inch thick brass stock sheet, measuring 22 inches by 21 inches, is engineered for demanding material handling applications requiring superior durability and corrosion resistance. Ideal for fabricating custom components.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.565" |
| Length | 22" |
| Width | 21" |
Precision-manufactured to tight tolerances, this 0.565" thick brass stock sheet offers exceptional dimensional stability, ensuring consistent performance in material handling systems. The inherent properties of brass, including its excellent corrosion resistance and moderate strength, make it ideal for components exposed to various environmental conditions and moderate loads. This specific alloy provides a balance of machinability and wear resistance, crucial for fabricating custom brackets, guides, wear plates, and other critical parts within conveyor systems, chutes, and specialized material transport equipment. Its non-sparking nature is also advantageous in potentially volatile environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface ensuring it is clean, level, and free of debris. 2. Accurately mark and drill mounting holes according to design specifications, utilizing appropriate drill bits for brass. 3. Secure the brass sheet using corrosion-resistant fasteners, ensuring even torque distribution to avoid warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that can corrode and compromise structural integrity. | Employ stainless steel or brass fasteners specifically designed for the operating environment. |
| Over-tightening fasteners, leading to localized stress concentrations and potential sheet deformation. | Tighten fasteners incrementally and evenly, using a torque wrench if precise load application is required. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom chute liners, Wear plates for material transfer points, Fabrication of specialized handling equipment components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||