Engineered brass stock sheet for superior lubrication performance. Its dense, self-lubricating properties reduce friction and wear in critical mechanical systems. Ideal for high-load bearings and sliding components.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.563" |
| Length | 48" |
| Width | 43" |
Built to exacting engineering tolerances, this 0.563-inch thick brass stock sheet offers superior dimensional stability and surface finish. Composed of a high-quality brass alloy, it exhibits excellent machinability and inherent lubricity, reducing the need for external lubricants in many applications. The 48-inch length and 43-inch width provide ample material for custom fabrication of components requiring low friction, such as bushings, wear plates, and guide rails. Its corrosion resistance ensures longevity in diverse operating environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of contaminants. 2. Cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component to the intended assembly, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys where specific lubricating properties are required. | Always specify a brass alloy known for its self-lubricating characteristics for applications demanding reduced friction. |
| Inadequate surface preparation of mating components, leading to premature wear. | Thoroughly clean and deburr all mating surfaces before installation to ensure optimal performance and lifespan. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear pads and strips, Guide bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||