This premium brass stock sheet is engineered for superior performance in material handling. Its robust composition ensures longevity and reliability in challenging industrial settings.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.554" |
| Length | 14" |
| Width | 44" |
Designed for demanding industrial environments, this brass stock sheet boasts a precise thickness of 0.554 inches, a substantial length of 14 inches, and a generous width of 44 inches. Fabricated from high-purity brass, it exhibits excellent tensile strength, superior corrosion resistance against a wide range of chemicals, and good electrical conductivity, making it ideal for custom fabrication of chutes, hoppers, wear plates, and structural components within material handling systems where durability and resistance to wear are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free of debris. 2. Accurately measure and cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the brass sheet to the intended structure using recommended fasteners or adhesives, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to jagged edges or material deformation. | Employ specialized metal cutting tools such as abrasive saws, band saws with appropriate metal-cutting blades, or waterjet cutting for precise and clean cuts. |
| Improperly aligning the sheet during fastening, resulting in structural stress or premature failure. | Utilize alignment jigs or temporary clamping mechanisms to ensure precise positioning before permanent fastening. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Chute Liners, Wear Plates for Conveyor Systems, Hoppers and Feeders, Impact Surfaces, Abrasion-Resistant Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||