This 0.553-inch thick 304 stainless steel stock sheet is engineered for superior performance in lubricating systems. Its robust construction ensures longevity and reliability in harsh industrial settings.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.553" |
| Length | 41" |
| Width | 21" |
Designed for demanding industrial environments, this 0.553" thick, 41" long by 21" wide sheet is fabricated from premium 304 stainless steel, renowned for its exceptional corrosion resistance, particularly against a wide range of lubricants and mild chemicals. The material's inherent strength and low magnetic permeability make it ideal for applications where friction reduction and material integrity are paramount. This sheet is specifically suited for fabricating components within lubricating systems, such as wear plates, guide rails, or containment surfaces, where smooth operation and resistance to wear are critical factors for optimal equipment performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the installation area and the stainless steel sheet to remove any debris or manufacturing oils. 2. Position the sheet precisely according to the design specifications for the lubricating system. 3. Secure the sheet using appropriate mechanical fasteners or welding techniques, ensuring a flush and robust fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard stainless steel without verifying lubricant compatibility. | Always confirm the 304 grade's compatibility with the specific lubricants being used in the system to prevent degradation or contamination. |
| Inadequate surface preparation leading to poor sliding performance. | Ensure a consistently smooth and clean surface finish on the sheet after installation to maximize lubricating efficiency and minimize wear. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Lubricant containment and transfer surfaces, Wear plates and guide rails in automated lubrication systems, Components for high-friction industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||