This premium brass stock sheet, engineered for lubrication, offers exceptional wear resistance and low friction. Its precise dimensions and material properties make it ideal for critical components in high-demand environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.552" |
| Length | 35" |
| Width | 40" |
Precision-manufactured to tight tolerances, this 0.552-inch thick brass stock sheet measures 35 inches in length and 40 inches in width. Composed of a high-quality brass alloy, it exhibits excellent inherent lubricity and a low coefficient of friction, minimizing wear and heat generation in dynamic systems. This material is chosen for its corrosion resistance and machinability, ensuring consistent performance and ease of integration into custom-designed bearing surfaces, bushings, and wear plates where reliable, low-maintenance operation is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Accurately machine the brass sheet to the required dimensions and tolerances for your application. 3. Securely install the component, ensuring proper alignment and contact with the mating surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy instead of a lubricating-grade brass. | Specify and verify that the brass stock sheet is manufactured from an alloy specifically formulated for lubricating applications, ensuring optimal friction and wear characteristics. |
| Inadequate surface preparation of the mating component. | Thoroughly clean and prepare the surface that the brass component will interface with to prevent premature wear and ensure smooth operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces in machinery, Self-lubricating bushings, Wear plates in sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||