This robust carbon steel stock sheet, measuring 0.551" thick by 28" wide and 35" long, is designed for critical pneumatic system components requiring exceptional structural integrity and resistance to impact.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.551" |
| Length | 28" |
| Width | 35" |
Engineered for reliability and performance, this carbon steel stock sheet offers a substantial 0.551" (14mm) thickness, ensuring superior load-bearing capabilities and impact resistance crucial for pneumatic actuator housings, mounting brackets, and structural supports. Its 28" x 35" dimensions provide ample material for fabrication of custom components. The inherent strength and durability of carbon steel make it ideal for high-pressure environments and applications demanding long service life and resistance to wear and tear. This material is selected for its predictable mechanical properties under stress, ensuring consistent performance in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare edges for fabrication (cutting, bending, welding) according to design requirements. 3. Integrate fabricated components into the pneumatic system, adhering to all safety protocols and design tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade steel not rated for pneumatic pressures. | Always specify and verify carbon steel with appropriate mechanical properties and thickness for the intended pneumatic application's pressure and load requirements. |
| Inadequate edge preparation leading to stress concentrations. | Ensure all edges are properly deburred, chamfered, or prepared as per design specifications to prevent premature failure, especially at cut or welded points. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder end caps and bases, Heavy-duty mounting plates for pneumatic actuators, Structural supports for pneumatic control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||