This high-grade brass stock sheet, measuring 0.551 inches thick by 16 by 20 inches, offers exceptional durability and precision for critical measuring and inspecting applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.551" |
| Length | 16" |
| Width | 20" |
Trusted by engineers across multiple sectors, this 0.551" thick brass stock sheet provides a stable, non-magnetic, and corrosion-resistant substrate ideal for metrology and inspection fixtures. Its precise dimensions (16" x 20") ensure accurate layout and fabrication of custom jigs, templates, and calibration standards. The inherent machinability of brass allows for intricate detailing and tight tolerances, making it suitable for applications requiring high dimensional stability and resistance to wear. This material is commonly specified for use in environments where non-sparking properties are also a consideration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, flat, and free of debris. 2. Carefully position the brass stock sheet onto the prepared surface. 3. Secure the sheet using appropriate fasteners (screws, rivets, or adhesive) at regular intervals to prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the sheet on uneven surfaces leading to inaccurate measurements. | Always verify the flatness of the mounting surface before installation. |
| Applying excessive force during machining, causing deformation. | Utilize appropriate tooling and cutting speeds for brass to maintain dimensional integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom gauge fabrication, Inspection fixture bases, Precision templates and jigs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||