This high-performance brass stock sheet is engineered for superior lubrication. Its specific alloy composition minimizes friction and wear, making it ideal for demanding mechanical applications requiring smooth operation and extended component life.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.550" |
| Length | 16" |
| Width | 20" |
Built to exacting engineering tolerances, this 0.550" thick brass stock sheet (16" x 20") offers exceptional dimensional stability. Composed of a carefully selected brass alloy, it exhibits excellent machinability and inherent self-lubricating properties, reducing wear and extending the lifespan of mating components. Its dense, non-porous structure ensures consistent performance in high-pressure and high-speed environments, making it suitable for bushings, bearings, and sliding mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of contaminants. 2. Cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut brass component to its intended location, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for high-friction applications. | Utilize this specialized lubricating grade brass for its inherent self-lubricating properties. |
| Improper surface preparation of mating components. | Thoroughly clean and deburr both the brass sheet and the mating surface to prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bushings and bearings, Wear plates in sliding mechanisms, Lubricated thrust washers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||