This high-grade carbon steel stock sheet, specifically engineered for lubricating applications, offers exceptional durability and machinability. Its precise dimensions and robust material properties make it a superior choice for demanding industrial uses.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.549" |
| Length | 30" |
| Width | 20" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a precise thickness of 0.549 inches, a length of 30 inches, and a width of 20 inches. The material composition is optimized for excellent wear resistance and a low coefficient of friction when properly lubricated, ensuring reduced wear and extended service life in dynamic mechanical systems. Its fine-grain structure allows for superior surface finish and dimensional stability during machining operations, making it suitable for components requiring tight tolerances and high performance under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Accurately cut to the required dimensions using appropriate tooling. 3. Deburr all edges to prevent material fatigue and ensure safety.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge damage or distortion. | Employ high-quality cutting tools specifically designed for carbon steel, maintaining appropriate speeds and feeds. |
| Insufficient deburring of cut edges. | Thoroughly deburr all cut edges using files, deburring tools, or a grinding wheel to remove sharp protrusions. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Wear plates and guides in machinery, Bearing surfaces and slide mechanisms, Custom shims and spacers requiring high load capacity.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||