This 0.548-inch thick, industrial-grade polycarbonate sheet offers superior impact resistance and optical clarity. Measuring 23" x 31", it's engineered for demanding applications requiring robust protection and durability.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.548" |
| Length | 23" |
| Width | 31" |
Trusted by engineers across multiple sectors, this 0.548" thick polycarbonate stock sheet (23" x 31") delivers exceptional impact strength, exceeding that of glass and acrylic. Its inherent toughness and wide operating temperature range (-40°F to 250°F) make it ideal for applications such as machine guarding, protective barriers, sight glasses, and architectural glazing where safety and longevity are paramount. Fabrication can be achieved through standard sawing, drilling, and thermoforming techniques, maintaining its structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines on the protective film. 2. Utilize a fine-tooth saw blade designed for plastics for precise cuts. 3. Ensure proper support during cutting to prevent vibration and cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard wood saw blade, leading to chipping and rough edges. | Employ a fine-toothed blade specifically designed for cutting polycarbonate to ensure clean, precise cuts. |
| Drilling holes too close to the edge, causing stress cracks. | Maintain adequate edge distance for drilled holes, typically at least twice the hole diameter, and consider using a pilot hole for larger diameters. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Barriers, Safety Glazing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||