This robust carbon steel stock sheet, engineered to precise dimensions, provides an exceptionally stable and durable surface for critical measuring and inspection tasks. Its substantial thickness ensures rigidity and accuracy in demanding industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.548" |
| Length | 37" |
| Width | 29" |
Specified by design engineers worldwide, this carbon steel stock sheet offers superior dimensional stability and wear resistance critical for metrology and fabrication. With a precise thickness of 0.548 inches, a length of 37 inches, and a width of 29 inches, it meets stringent tolerance requirements for use as a reference surface, precision tooling plate, or a foundational element in custom gauging fixtures. The inherent hardness and low thermal expansion coefficient of carbon steel ensure consistent performance under varied operational conditions, making it suitable for high-volume production and quality assurance applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is perfectly flat and level. 2. Secure the stock sheet using appropriate fasteners, distributing load evenly to prevent warping. 3. Calibrate the sheet's surface against a certified standard if used for precision measurement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Mounting the sheet on an uneven surface, leading to calibration inaccuracies. | Always use a verified flat mounting surface and consider using leveling shims if necessary. |
| Over-tightening fasteners, causing localized deformation and distortion of the sheet. | Tighten fasteners incrementally and in a pattern to ensure even pressure distribution, avoiding excessive torque. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Precision measuring and inspection surfaces, Reference standards for calibration, Base plates for custom gauging and fixturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||