This premium carbon steel stock sheet, classified under lubricating grades, offers superior durability and precise dimensions for demanding industrial applications. Engineered for optimal performance in lubrication systems.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.546" |
| Length | 40" |
| Width | 14" |
Specified by design engineers worldwide, this 0.546-inch thick carbon steel stock sheet measures 40 inches in length and 14 inches in width. Manufactured from high-grade carbon steel, it exhibits excellent tensile strength and wear resistance, making it ideal for components within lubricating systems such as bearing housings, wear plates, and lubricant reservoirs. Its consistent material properties ensure predictable performance and longevity under continuous operation and varying load conditions, supporting critical machinery functions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from debris. 2. Precisely align the stock sheet to its designated position. 3. Secure the sheet using appropriate fasteners or welding techniques as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or fit. | Thoroughly clean all mating surfaces to remove any oil, grease, or particulate matter before installation. |
| Over-tightening fasteners, causing deformation of the sheet. | Follow torque specifications precisely when using fasteners to avoid material stress and warping. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Bearing housings, Wear plates in lubrication systems, Lubricant reservoirs and containment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||