This industrial-grade Nylon stock sheet offers exceptional strength and durability. Precisely manufactured to 0.545" thickness, 42" length, and 33" width, it's ideal for robust component fabrication.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.545" |
| Length | 42" |
| Width | 33" |
Manufactured under strict quality controls, this Nylon stock sheet (PA6) provides excellent tensile strength, impact resistance, and a low coefficient of friction. Its 0.545" thickness, combined with a 42" length and 33" width, makes it suitable for fabricating robust mechanical components, wear pads, and high-stress structural elements. The material exhibits good chemical resistance and electrical insulating properties, fulfilling the rigorous demands of various industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, CNC router) with suitable blades for plastics. 3. Smooth all cut edges to remove burrs and sharp points before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools which can cause melting or chipping. | Employ sharp, specialized blades designed for plastic cutting and ensure proper feed rates. |
| Not accounting for thermal expansion during machining or installation. | Allow for slight gaps or use fasteners that accommodate minor dimensional changes due to temperature fluctuations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gears and sprockets, Wear strips and guide rails, Bushings and bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||