This 0.544-inch thick Nylon Stock Sheet offers superior self-lubricating properties, making it ideal for demanding industrial applications requiring reduced friction and wear.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.544" |
| Length | 41" |
| Width | 44" |
A proven choice for industrial professionals, this Nylon Stock Sheet boasts a substantial 0.544" thickness, ensuring robust performance in high-stress environments. Its excellent wear resistance and low coefficient of friction, inherent to its nylon composition, make it a preferred material for fabricating custom bushings, bearings, wear pads, and guide rails. The generous dimensions of 41" in length and 44" in width provide ample material for a wide range of manufacturing needs, facilitating efficient cutting and machining of complex components. This grade is engineered for consistent performance and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired component dimensions on the stock sheet. 2. Precisely cut the nylon using appropriate tooling for machining plastics. 3. Smooth all edges and deburr for optimal fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Employ specialized cutting tools with appropriate rake angles and cooling to prevent heat buildup and ensure clean cuts. |
| Over-tightening fasteners when assembling components made from nylon, causing stress fractures. | Use torque-limiting tools or washers to distribute load and avoid over-compression of nylon parts. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bushings and Bearings, Wear Strips and Guide Rails, Chute Liners and Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||