This high-quality brass stock sheet is specifically formulated and manufactured for lubricating applications. Its inherent properties offer excellent wear resistance and a low coefficient of friction, ensuring smooth operation in critical components.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.540" |
| Length | 31" |
| Width | 47" |
Built to exacting engineering tolerances, this 0.540" thick brass stock sheet offers superior dimensional stability. Composed of a specific brass alloy known for its self-lubricating characteristics and excellent machinability, it minimizes wear and friction in dynamic systems. The sheet's robust nature ensures longevity in high-load and moderate-temperature environments, making it suitable for precision-machined parts like bushings, bearings, wear pads, and sliding elements where galling resistance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Machine the brass stock sheet to the required dimensions and tolerances for the specific component. 3. Install the component, ensuring proper alignment and lubrication if supplementary lubrication is recommended for the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys for high-friction applications. | Select brass alloys specifically designed for lubricating properties to prevent premature wear and galling. |
| Insufficient surface preparation of mating parts. | Ensure all mating surfaces are meticulously cleaned and free of imperfections to maximize the lubricating effect of the brass. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearings, Self-lubricating bushings, Wear plates and slides, Galling-resistant components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||