Engineered for demanding environments, this 0.538" thick, 12" x 45" polycarbonate sheet offers exceptional lubricity. Its robust material properties ensure superior wear resistance and low friction in critical applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.538" |
| Length | 12" |
| Width | 45" |
Manufactured under strict quality controls, this premium polycarbonate stock sheet boasts a nominal thickness of 0.538 inches, a standard length of 12 inches, and a width of 45 inches. Its inherent lubricating properties are achieved through proprietary additives, providing a low coefficient of friction and excellent self-lubricating characteristics. This makes it ideal for components subjected to constant motion, high loads, and potential abrasion, where traditional lubrication methods are impractical or undesirable. The material exhibits excellent impact strength, good chemical resistance, and a wide operating temperature range, ensuring longevity and reliable performance in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free of contaminants. 2. Carefully align the polycarbonate sheet with the mounting points, avoiding excessive stress. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent warping or cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks. | Use washers and tighten fasteners incrementally and evenly. |
| Exposing the sheet to aggressive solvents that may degrade the polycarbonate. | Consult chemical resistance charts before cleaning or in proximity to solvents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction sliding surfaces, Wear strips and guides, Bushings and bearings in dry-running applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||